Bentley announces today that it will cease production of its 12-cylinder petrol engine in April 2024, by which time more than 100,000 examples of the iconic W12 will have been handcrafted in the company’s Dream Factory in Crewe, England.
The decision comes as part of Bentley’s acceleration towards a sustainable future through its Beyond100 strategy which will see the company’s entire model line fully electrified by the start of the next decade, reducing fleet average emissions to 0 g/km CO2. This journey has already begun, with the introduction of the Bentayga and Flying Spur Hybrid models for which demand is exceeding the company’s expectations. Meanwhile, an engine first made available in the sector-defining Continental GT, which has been powering Bentley both metaphorically and literally for the last 20 years, will be consigned to history.
Bentley isn’t letting the W12 bow out without a dramatic send-off. Development work has concluded recently on the most powerful version of the W12 ever created. The ultimate iteration of this mighty engine – destined for just 18 examples of the Bentley Batur to be handcrafted by Mulliner – is now confirmed as developing 750 PS and 1,000 Nm of torque.
Bentley’s Chairman and Chief Executive, Adrian Hallmark, comments:
“Our progressive journey towards sustainable luxury mobility means making changes to every area of Bentley Motors. When we first launched the W12 back in 2003, we knew we had a mighty engine that would propel both our cars and the brand forwards at speed. 20 years and more than 100,000 W12s later, the time has come to retire this now-iconic powertrain as we take strides towards electrification – but not without giving it the best send-off possible, with the most powerful version of the engine ever created.”
The uprated engine has proven to be as reliable as ever and so will equip the most powerful road-going Bentley ever built. While all Baturs are sold, a limited number of the 659 PS version of the W12 engine offered in the Speed versions of Continental GT, Bentayga and Flying Spur as well as the Continental GT Mulliner and Flying Spur Mulliner can still be ordered. These final W12-powered Speed and Mulliner models is expected to be high, and customers eager to secure one of the last ever 12-cylinder Bentleys should contact their retailer with equal speed – orders for W12-powered models will close in December.
Bentley plans to expand the line for the completion of other Bentley engines used for plug-in hybrid models by repurposing the W12 engine production facility in their carbon-neutral factory in Crewe.
Since the first introduction of the 6.0-litre, twin-turbocharged W12 in 2003, the engineering team in Crewe has continually improved the performance of the engine in terms of power, torque, emissions and refinement. For the launch of the Bentayga in 2015, the W12 was completely redesigned from the sump up, and it’s that version of the engine that remains in production today – featuring cylinder deactivation, direct and port injection, and twin-scroll turbos.
Each W12 engine is hand-built over 6.5 hours by a team of craftspeople before undertaking a highly sophisticated test regime of over an hour via three specialist diagnostic machines. Every week, one engine is run over an extended test cycle and then fully stripped for inspection.
The W12 engine facility will have delivered over 105,000 engines before reaching its 20th anniversary this year.
Batur Showcases the Ultimate W12
For the final and ultimate version of the W12, Mulliner’s engineering team has reworked the intake, exhaust and cooling systems to liberate more power and torque than ever before. Under the watchful eye of Mulliner’s Chief Technical Officer, Paul Williams (who previously led the development of the second-generation W12), the engine is now signed-off at 750 PS and 1,000 Nm of torque – both record-breaking figures for the engine.
The turbocharger compressors are of a new design to improve efficiency, while the ducts that feed air to them are 33 per cent larger – at peak power, the new engine ingests more than a ton of air (1,050 kg) per hour. Larger charge-air coolers reduce intake temperature to a greater extent meaning a denser charge for more power.
The Evolution of an Icon
Bentley’s legendary 6.0-litre twin-turbocharged W12, created in 2002, has evolved into the latest iteration of W12 engine used across today’s current model range. The unique W-configuration means that the engine is 24 per cent shorter than an equivalent V12, benefitting packaging and maximising usable cabin space.
The W12 combines high-pressure direct fuel injection (200 bar injection pressure) with low-pressure port injection (six bar). The combination of these two systems maximises refinement, lowers particulate emissions and optimises power and torque delivery.
Kia Niro Named Supreme Winner of the Women’s World Car of the Year
Nissan unveils new approach to electrified powertrain development
BMW iX5 Hydrogen pilot fleet arrives in the Middle East.
AKEBONO RELEASES PROACT ULTRA-PREMIUM DISC BRAKE PAD KITS FOR HONDA, FORD, LINCOLN AND TOYOTA INCREASING COVERAGE BY OVER 5 MILLION VEHICLES
Hyundai 2023 IONIQ 6 SE Long Range RWD Achieves an exceptional EPA-Estimated Driving Range
© 2023 Tires and Parts News Resource. All Rights Reserved.