X5 M50i (G05) DCL dÄHLer competition line

The absolute pinnacle and top dog of the series is undoubtedly the X5 M. And in this category of vehicle, the purchase price is not the most important factor in the decision to buy. But there is one vehicle that can truly match it – even in terms of power – the X5 M50i (G05) DCL dÄHLer competition line. The X5 M50i DCL dÄHLer competition line is a car that runs on emotion. It houses a V8 that sounds just like a V8 should: In contrast to the X5 M, the X5 M50i “babbles” and “blubbers” with the unmistakable, unadulterated V8 sound that so many fans love. And speaking of emotion, you get pure driving pleasure thanks to a torque increase (+100 Nm!) that you can truly feel and a more comfortably tuned chassis than in the X5 M. In combination with a significant price advantage over a series X5 M, the X5 M50i DCL dÄHLer competition line has a lot going for it – both emotionally and financially. There’s no arguing about power and torque, especially when there is as much of it as there is in the X5 M50i from dÄHLer. As a comprehensively optimized and harmoniously tuned complete vehicle with a performance upgrade powered by dÄHLer, it presents itself as a “powerhouse” on wheels with a strong, bearish presence paired with athletic elegance. The high-performance M TwinPower Turbo 8-cylinder gasoline engine with 4.4 liters of cubic capacity unmistakably sets the tone: With 390 kW (530 hp), 750 Nm (553 ft-lb) as standard, this is one of the most powerful engines of all BMW series vehicles. Building on this basis, Dähler Competition Line AG from Bern, Switzerland, has tapped the full optimization potential of the X5 M50i and provided finishing touches to the vehicles in the form of comprehensive customization work and a hefty power boost. The technical highlights of the X5 M50i (G05) DCL dÄHLer competition line: • Power boost level 1 powered by dÄHLer: 463 kW (630 hp), 840 Nm (620 ft-lb), incl. increase of the series Vmax limit – maximum speed 270 km/h (electronically limited) WLTP-E6d-temp tested and approved for sale in the EU and Switzerland, with corresponding supplementary warranty in addition to factory warranty. • Power boost level 2 powered by dÄHLer: If some is good, more must be better! Level 2 with even more power is still in development. • 4-pipe stainless steel complete exhaust system built by dÄHLer with the sporty, signature dÄHLer sound is a real highlight. The exhaust system is rounded off by the ceramic-coated dÄHLer tailpipes measuring 101 mm in diameter. The top-quality ceramic coating is not only highly practical – with outstanding features such as a high hardness and resistance to wear, electrical insulation, low thermal conductivity, and a consistently reproducible surface structure – it also has a highly refined look. The new-and-improved exhaust system also works in perfect harmony with the factory-installed gasoline particulate filters (GPF). And if that wasn’t enough, for real BMW enthusiasts dÄHLer is offering an additional, CAN bus- controlled exhaust valve controller. This gives the driver 100% control over the noise levels – regardless of driving mode or r.p.m. and speed range. (Not EU/CH-approved) • Carefully configured, fine-tuned sport springs built by dÄHLer that lower the chassis for greater driving stability, far fewer rolling movements, reduced sensitivity to crosswinds, and improved aesthetics – specially tailored to the “EDC electronic damping system”. Coming soon: Performance coilover suspension built by dÄHLer (adjustable in height and hardness) specially and carefully tailored to the vehicle for greater agility is being developed. • The cherry on the cake: The perfectly sized, stylish, exclusive, and ultra-light high-quality 23- inch forged wheels dÄHLer CDC1 FORGED with 305/30 R23 tires. Using the latest manufacturing technology, dÄHLer has designed a wheel that meets the most exacting of standards thanks to its high strength and low weight. The wheel blends seamlessly into the overall aesthetics of the X5 M50i, effortlessly enhancing the imposing presence of the vehicle. It is available in 11×23″ in many different colors.

Advantages at a glance: • Weight 30% to 35% lower compared to conventional light alloy wheels • Greatly improved longitudinal and transverse dynamics • Greatly improved acceleration and deceleration values thanks to the lower accelerated mass • Better and more agile handling/steering behavior • High-quality powder coating for perfect protection of the wheel surface • Large selection of surface colors with incorporated FORGED and dÄHLer logos
Call us now to book an appointment so we can devise the perfect solution for your X5 M50i together. Experience it for yourself: dynamic power, precise performance, and enjoyable driving in any situation – be it on asphalt, gravel or sand, in rain, snow or mud! With the coveted X5 M50i DCL dÄHLer competition line complete package, you can really feel the technological harmony and precision and enjoy the thrilling driving sensation to the max!